- Sort by Popularity
- Display 12 Products per page
-
500-712-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-712-20
Range : 0 – 150 mm
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-157-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
Order No. : 500-157-30
Range : 0-200 mm
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
500-445| ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED | MITUTOYO
ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED
Order No.: 500-445
Range : 0-200 mm
Description:
This ABSOLUTE digimatic solar caliper enables you to take reliable measurements and offers you the following benefits:
- You can operate it in just 60 lux ambient lighting.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
-
534-115 | LONG JAW VERNIER CALIPER-SERIES 534, 0-750mm | MITUTOYO
LONG JAW VERNIER CALIPER-SERIES 534
Orange No. : 534-115
Range : 0-750 mm
Description :
These vernier calipers with long jaws come with or without fine adjustment and let you measure hard-to-reach features.
They offer you the following benefits:- Long jaws enable you to measure hard-to-reach workpiece features.
- The top offset vernier scale allows you to directly read the inside dimensions without having to add the jaw blade width.
-
505-730 | DIAL CALIPER SERIES 505 – 0-150mm | MITUTOYO
DIAL CALIPER SERIES 505
Order No.: 505-730
Range : 0-150 mm
Description :
This metric dial caliper allows you to take reliable measurements and offers you the following benefits:
- Ultra-smooth sliding and high shock protection
- Easy to read dial with large character height
-
500-731-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-731-20
Range : 0-6″
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-160-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
*Carbide-tipped jaws for outside and inside measurement*
Order No. : 500-160-30
Range : 0-6″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
532-120 | VERNIER CALIPER 532 SERIES – WITH FINE ADJUSTMENT 0-180mm/0-7″ | MITUTOYO
VERNIER CALIPER 532 SERIES – WITH FINE ADJUSTMENT
Order No.: 532-120
Range : 0-180 mm / 0-7 in
Description :
• Fine-adjustment aids slider positioning.
• Allows step measurement. -
573-734-20 | BLADE TYPE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-6″ | MITUTOYO
BLADE TYPE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No.: 573-734-20
Range : 0-6″
Description :
These blade calipers have thin measuring jaws. They offer you the following benefits:
- The thin blade-type jaws fit into very small grooves making it much easier for you to obtain many previously difficult outside measurements.
- The outside measuring faces are carbide.
-
573-181-30 | ABSOLUTE SNAP CALIPER SERIES 573, 0-100mm | MITUTOYO
ABSOLUTE SNAP CALIPER SERIES 573
Order No. 573-181-30
Range : 0 – 100mm
Description :
• An ABSOLUTE electromagnetic induction linear encoder system is incorporated.
• Snap mechanism allows continuous and easy measurement without moving the
slider by using the lever.
• Displacement of snap part is 2 mm.
• Measuring force: 7 N to 14 N -
500-764-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-764-20
Range : 0-12″
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-166-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
*Carbide tipped jaws for outside and inside measurement*
Order No. : 500-166-30
Range : 0-12″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector.
