measuring tools

Indicator Type Micrometer Series 107 (without indicator)

Range : 50-75 mm

Order No. : 107-203

• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer.

Order No. 105-106

Outside Micrometer with Anvil Extension Collars

Range : 800-900 mm

MITUTOYO

• Adjustable measuring range with extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO

Order No. : 468-274

Range : 4-5″

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.

3-POINT INTERNAL MICROMETER HOLTEST  | MITUTOYO

Order No. 368-161

Range. 6-8 mm

Description

• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range.

TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE

Order No. : 133-174

Range : 825-850mm

Description :

This is a standard single rod type inside micrometer (individual unit), with the following features:

• Standard single rod.
• Carbide measuring faces.

INSIDE MICROMETER SERIES 145 – CALIPER TYPE

Order No. 145-190

Range: 125-150mm

Description:

• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment.

BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES

บอร์เกจ – สำาหรับรูขนาดเล็กมาก

Order No.: 526-163-21

Range: 1.50 – 3.95 mm

Description:

• This series allows for agile and highly accurate comparative measurement of ø1 to 7 mm inside diameters.
• We offer an array of indicators. Contact us if you prefer any indicator other than the standard recommended indicator.
• Optional stand (215-120-10) is available for efficient measurement of multiple small holes.

BORE GAGE SERIES 511 – SHORT LEG TYPE

Order No.: 511-768-20

Range: 50-150 mm

Description:

• As it is light and easy to handle with a short rod below the grip, the operator can work smoothly when inserting it into a narrow space or measuring an object on the table.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand.

• For calibrating and setting height gages.

• Staggered arrangement of block stack have two measuring faces on the same level, one facing up and the other down.

• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.

• For calibrating and setting height gages.

• Staggered arrangement of block stack have two measuring faces on the same level, one facing up and the other down

Outside Micrometer Series 406 – Non Rotating Spindle Type

Range : 2-3″

Resolution : 0.00005″/0.001 mm

Order No. : 406-352-30

• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force.

Order No. 104-147A

Outside Micrometer with Interchangeable Anvils 

Range : 800-900 mm

MITUTOYO

• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• Equipped with Ratchet Stop for constant measuring force.