measuring tools

Outside Micrometer Series 406 – Non Rotating Spindle Type

Range : 0-25 mm

Resolution : 0.001 mm

Order No. : 406-250-30

• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force.

Order No. 104-142A

Outside Micrometer with Interchangeable Anvils 

Range : 300-400 mm

MITUTOYO

• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• Equipped with Ratchet Stop for constant measuring force.

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO

Order No. : 468-280

Range : 10-11″

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.

3-POINT INTERNAL MICROMETER HOLTEST  | MITUTOYO

Order No. 368-167

Range. 25-30 mm

Description

• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range.

TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE SET (4 pcs.)

Order No. : 133-901

Range : 50-150mm

Description :

This is a standard single rod type inside micrometer (individual unit), with the following features:

• Standard single rod.
• Carbide measuring faces.

INSIDE MICROMETER SERIES 145 – CALIPER TYPE

Order No. 145-220

Range: 275-300mm

Description:

• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment.

BORE GAGE SERIES 511 – FOR SMALL HOLES

Order No. 511-211-20

Range: 6-10mm

Description :

• These gages are designed to measure the diameters of very small holes.
• Select an indicator from the recommended dial indicators and Digimatic indicators. Please contact us for advice when using an indicator other than the recommended indicators.
• Customized products with a longer rod below the grip or with a carbide anvil are available upon request.

ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology

Order No. : 500-196-30

Range : 0-6″

Description :

• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector.

• Used for efficient zero-setting of dial bore gages and tubular inside micrometers (18 – 150 mm) on a Height Master.