- Sort by Popularity
- Display 12 Products per page
-
526-160-11 | BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES, 1.50 – 3.95mm | MITUTOYO
BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES
บอร์เกจ – สำาหรับรูขนาดเล็กมาก
Order No.: 526-160-11
Range: 1.50 – 3.95 mm
Description:
• This series allows for agile and highly accurate comparative measurement of ø1 to 7 mm inside diameters.
• We offer an array of indicators. Contact us if you prefer any indicator other than the standard recommended indicator.
• Optional stand (215-120-10) is available for efficient measurement of multiple small holes. -
511-204-20 | BORE GAGE SERIES 511 – FOR SMALL HOLES, 10-18.5mm | MITUTOYO
BORE GAGE SERIES 511 – FOR SMALL HOLES
Order No. 511-204-20
Range: 10-18.5mm
Description :
• These gages are designed to measure the diameters of very small holes.
• Select an indicator from the recommended dial indicators and Digimatic indicators. Please contact us for advice when using an indicator other than the recommended indicators.
• Customized products with a longer rod below the grip or with a carbide anvil are available upon request. -
500-160-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
*Carbide-tipped jaws for outside and inside measurement*
Order No. : 500-160-30
Range : 0-6″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
515-111 | AUXILIARY BLOCK KIT SERIES 515 – for BORE GAGE – OPTIONAL ACCESSORIES | MITUTOYO
• Used for efficient zero-setting of dial bore gages and tubular inside micrometers (18 – 150 mm) on a Height Master.
-
339-102 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 8-9″ | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-102
Range : 8-9″
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
406-252-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 50-75 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 50-75 mm
Resolution : 0.001 mm
Order No. : 406-252-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
104-143A | Outside Micrometer with Interchangeable Anvils, 400-500 mm | MITUTOYO
Order No. 104-143A
Outside Micrometer with Interchangeable Anvils
Range : 400-500 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• Equipped with Ratchet Stop for constant measuring force. -
468-281 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-281
Range : 11-12″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
368-168 | Holtest – Three-Point Internal Micrometer Holtest 30-40mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-168
Range. 30-40 mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
133-902 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE SET, 10 Pcs. | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE SET (10 pcs.)
Order No. : 133-902
Range : 50-300mm
Description :
This is a standard single rod type inside micrometer (individual unit), with the following features:
- Standard single rod.
- Carbide measuring faces.
-
141-003 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE CARBIDE TIPPED, 25-32mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE CARBIDE TIPPED
Order No. 141-003
Range: 25-32mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
511-722-20 | BORE GAGE SERIES 511, 35-60mm | MITUTOYO
BORE GAGE SERIES 511
Order No.: 511-722-20
Range: 35-60 mm
Description:
• This series includes models for highly accurate measurement of ø18 to 400 mm inside diameters.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values by reducing heat transfer from the operator’s hand.
• Optional extension rods are available for measuring deep holes. Customized products with a longer rod below the grip are also available upon request.
