- Sort by Popularity
- Display 12 Products per page
-
526-160-11 | BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES, 1.50 – 3.95mm | MITUTOYO
BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES
บอร์เกจ – สำาหรับรูขนาดเล็กมาก
Order No.: 526-160-11
Range: 1.50 – 3.95 mm
Description:
• This series allows for agile and highly accurate comparative measurement of ø1 to 7 mm inside diameters.
• We offer an array of indicators. Contact us if you prefer any indicator other than the standard recommended indicator.
• Optional stand (215-120-10) is available for efficient measurement of multiple small holes. -
511-766-20 | BORE GAGE SERIES 511 – SHORT LEG TYPE, 18-35mm | MITUTOYO
BORE GAGE SERIES 511 – SHORT LEG TYPE
Order No.: 511-766-20
Range: 18-35 mm
Description:
• As it is light and easy to handle with a short rod below the grip, the operator can work smoothly when inserting it into a narrow space or measuring an object on the table.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
617841-016 | ZERO CERA BLOCK, 700mm | MITUTOYO
ZERO CERA BLOCK
เกจบล็อค
Order No. 617841-016
Description :
These are ultra-low expansion ceramic gauge blocks.
The ZERO CERA Blocks offer you the following benefits:- Thermal expansion at 20 ±1°C is less than 1/500 that of steel.
- There is almost no secular change either in the dimension or coefficient of thermal expansion.
- You will find them light and easy to handle.
- They are rust free.
- They are magnetisation free.
-
311-112 | HIGH PRECISION SQUARE SERIES 311 | MITUTOYO
• The High-Precision Square gage is used for inspecting the travel straightness and axial perpendicularity of moving elements on equipment, such as machine tools and CMMs.
• Four precision-lapped reference surfaces, finished using ultra-precision technology built on our experience in gauge blocks.
• Better than 1 μm/300 mm straightness and perpendicularity of each (four) reference surface. In addition, front and back faces are accurate to better than 5 μm/300 mm.
• Three nominal sizes are available (90×110, 160×210 and 260×310 mm) so that you can select the size that best suits the application.
-
339-102 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 8-9″ | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-102
Range : 8-9″
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
406-252-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 50-75 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 50-75 mm
Resolution : 0.001 mm
Order No. : 406-252-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
468-281 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-281
Range : 11-12″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
368-168 | Holtest – Three-Point Internal Micrometer Holtest 30-40mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-168
Range. 30-40 mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
141-003 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE CARBIDE TIPPED, 25-32mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE CARBIDE TIPPED
Order No. 141-003
Range: 25-32mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
511-204-20 | BORE GAGE SERIES 511 – FOR SMALL HOLES, 10-18.5mm | MITUTOYO
BORE GAGE SERIES 511 – FOR SMALL HOLES
Order No. 511-204-20
Range: 10-18.5mm
Description :
• These gages are designed to measure the diameters of very small holes.
• Select an indicator from the recommended dial indicators and Digimatic indicators. Please contact us for advice when using an indicator other than the recommended indicators.
• Customized products with a longer rod below the grip or with a carbide anvil are available upon request.