- Sort by Popularity
- Display 24 Products per page
-
123-108 | Disk Micrometer – Hardened Steel Disk Series 123, 175-200 mm, Disk=30 mm | MITUTOYO
Disk Micrometer – Hardened Steel Disks
Order No. 123-108
Range : 175-200 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
369-412-20 | Disk Micrometer, QuickMike, IP65 – 25-55 mm | MITUTOYO
Disk Micrometer- IP65, QuickMike
Order No. : 369-412-20
Range : 25-55 mm
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module (series 227: 0.4 to 3 module).
• Equipped with Ratchet Stop for constant measuring force. -
395-252-30 | Tube Micrometer, 25-50mm | MITUTOYO
TUBE MICROMETER – SERIES 395
Order No. 395-252-30
Range: 25-50mm
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
115-308 | Tube Micrometer – Spherical and Cylindrical Anvil Type, 0-25mm | MITUTOYO
TUBE MICROMETER – SPHERICAL AND CYLINDRICAL ANVIL TYPE – SERIES 115
Range : 0-25 mm
Order No. 115-308
• Spindle face: Carbide.
• Series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
111-123 | Spline Micrometer, 200-225 mm | MITUTOYO
SPLINE MICROMETER SERIES 111
Order No. 111-123
Range. : 200-225 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
112-213 | Point Micrometer with Carbide Tip – Series 112, 0-25 mm | MITUTOYO
POINT MICROMETER with Carbide tip – SERIES 112
Order No. : 112-213
Range : 0-25 mm
• Ideal tool for measuring drill web diameters, small grooves and other hardto- reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• Equipped with Ratchet Stop for constant measuring force. -
155-127 | Telescoping Gage – Series 155 | MITUTOYO
TELESCOPIC GAGE – SERIES 155
Order No. 155-127
• A spring-loaded plunger expands within a bore (or groove) and is locked in place allowing measurement of diameter (or width) with an outside micrometer after extraction.
-
167-391 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-391
Length : 1675 mm
-
148-304-10 | Micrometer Heads – Short Thimble with Choice of Diameter – SERIES 148 | MITUTOYO
MICROMETER HEAD – SHORT THIMBLE WITH CHOICE OF DIAMETER – SERIES 148
Order no. 148-304-10
Range: 0-6.5mm
Description :
• Short body design maintains measuring range for limited space applications.
• Available in three thimble diameters to provide ease-of-reading options.
-
151-260-10 | Micrometer Heads – Medium-size standard Type with 8mm Diameter Spindle – SERIES 151 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE
With 8mm Diameter Spindle – SERIES 151
MITUTOYO
Order no. 151-260-10
Range: 0-50mm
Description :
• Larger spindle (ø8 mm) for heavy-duty applications (normally ø6.35 mm).
-
148-323-10 | Micrometer Heads – Fine Spindle Feed of 0.25mm/rev – SERIES 148 | MITUTOYO
MICROMETER HEAD – FINE SPINDLE FEED OF 0.25mm/rev – SERIES 148
MITUTOYO
Order no. 148-323-10
Range: 0-6.5mm
Description :
• Micrometer head with 0.25 mm spindle pitch is convenient for fine-feed and fine-positioning applications.
-
326-251-30 | Screw Thread Micrometer- Interchangeable Anvil/Spindle Tip Type 0-25 mm | MITUTOYO
Screw Thread Micrometers
Order No. 326-251-30
Range : 0-25 mm
• Use by installing a suitable interchangeable anvil/spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65,waterproof Digimatic screw thread micrometer with interchangeable anvil/spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils/spindle tips are optional.
