- Sort by Popularity
- Display 12 Products per page
-
123-116 | Disk Micrometer – Disks with Carbide Tips Series 123, 75-100 mm, Disk=20 mm | MITUTOYO
Disk Micrometer – with Carbide Tips
Order No. 123-116
Range : 75-100 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
369-421-20 | Disk Micrometer – Non-Rotating Spindle, IP65, QuickMike, Inch/Metric, 0-1.2″ | MITUTOYO
369-421-20 | Disk Micrometer – Non-Rotating Spindle, IP65, QuickMike, Inch/Metric, 0-1.2″ | MITUTOYO
Disk Micrometer QuickMike- Non-Rotating Spindle – IP65
Order No. : 369-421-20
Range : 0-1.2″
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module (series 227: 0.4 to 3 module).
• Equipped with Ratchet Stop for constant measuring force. -
115-101 | Tube Micrometer, 0-15mm | MITUTOYO
TUBE MICROMETER – SERIES 115
Order No. 115-101
Range : 0-15 mm
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
112-401 | Crimp Height Micrometer, 0-25mm | MITUTOYO
CRIMP HEIGHT MICROMETER
Range : 0-25 mm
Order No. 112-401
• Measures the height of crimp contacts.
• Equipped with Ratchet Stop for constant measuring force. -
342-254-30 | Point Micrometer – Series 342, 75-100 mm | MITUTOYO
POINT MICROMETER – SERIES 342
Order No. : 342-254-30
Range : 75-100 mm
• Ideal tool for measuring drill web diameters, small grooves and other hard-to-reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• IP65 Digimatic micrometers.
• Equipped with Ratchet Stop for constant measuring force. -
314-253-30 | V-Anvil Micrometer – 3 Flutes, 25-40 mm | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-253-30
Range : 25-40 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
156-102 | Micrometer Stands – Series 156 | MITUTOYO
MICROMETER STANDS – SERIES 156
Description
• Dedicated stand for micrometers.
• Designed to allow benchtop use of hand micrometers or other gages which have frames suitable for gripping by the clamp.
Reduces the influence of temperature changes due to body heat, enabling higher accuracy measurement.Order No. 156-102
-
167-399 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-399
Length : 1875 mm
-
148-802-10 | Micrometer Heads – Small Standard Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – SMALL STANDARD TYPE – SERIES 148
Order no. 148-802-10
Range: 0-13mm
Description :
• Measuring range of 13 mm.
-
148-151-10 | Micrometer Heads – Locking-screw Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – LOCKING-SCREW TYPE – SERIES 148
MITUTOYO
Order no. 148-151-10
Range: 0-13mm
Description :
• Locking screw provides secure locking at any position of the spindle.
• Position of the locking screw is the same as the sleeve index line. -
110-502-10 | Micrometer Heads – Differential Screw Thread Translator (Extra-Fine Feed) Type – SERIES 110 | MITUTOYO
MICROMETER HEAD – DIFFERENTIAL SCREW THREAD TRANSKATOR (Extra-Fine Feed) – SERIES 110
MITUTOYO
Order no. 110-502-10
Description :
• The differential movement of spindle thread and nut allows ultra-fine feeding.
