- Sort by Popularity
- Display 36 Products per page
-
152-380 | Micrometer Head – Large Thimble Type SERIES 152 | MITUTOYO
MICROMETER HEAD – LARGE THIMBLE TYPE SERIES 152
MITUTOYO
ORDER NO. : 152-380
DESCRIPTION :
• Large-diameter thimble for fine adjustment and positioning.
-
125-101 | Screw Thread Micrometer, 0-25 mm, 0.4-0.5 mm/64-48TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-101
Range : 0-25 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
293-145-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 0-25mm | MITUTOYO
QuantuMike
Series 293 IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 0-25mm• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
293-247-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Size : 75-100 mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-679-20 | Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293, 3-4.2″ | MITUTOYO
Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293
Order No. 293-679-20
Range : 3-4.2″• The Quickmike provides a speedy spindle feed of 10 mm per thimble rotation which enables widely differently sized features to be measured quickly.
• Set the origin only once. The absolute linear scale maintains the origin throughout the life of battery, meaning no more zero setting (presetting) or overspeed error.
• Measuring faces: Carbide.
• Supplied with a Ratchet Stop for constant measuring force. -
102-701 | Ratchet Thimble Micrometer Series 102 – Outside Micrometer, 0-25 mm, 0.01 mm | MITUTOYO
Ratchet Thimble Micrometer – Outside Micrometer
Range : 0-25 mm
Graduation : 0.01 mm
Order No. 102-701• More accurate in easy one-handed operation.
• Ratchet function works both from the thimble and the speeder.
• Rotating the thimble/speeder causes the ratchet mechanism to operate and apply a constant measuring force to the workpiece.
• Heat-insulated frame.
• Measuring faces: Carbide. -
103-164 | Outside Micrometer Series 103, 675-700 mm | Mitutoyo
Outside Micrometer Series 103
Range 675-700 mm
Graduation 0.01 mm
Order No. 103-164
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
107-201 | Indicator Type Micrometer Series 107, 0-25 mm, without indicator | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 0-25 mm
Order No. : 107-201
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
146-221 | Groove Micrometers -Non-Rotating Spindle Series 146 – 0-25 mm, 6.35 mm Flange | MITUTOYO
Groove Micrometers – Non-Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-221
Flange : 6.35 mm
• Flanged spindle and anvil for measuring width and location of grooves inside bores and tubes.
• Two-directional ratchet stop.
• For ID and OD (except for 0 – 25 mm) measurement, a master gage is required for adjusting the reference point.
• Non-rotating spindle. -
422-270-30 | Blade Micrometer – Non-Rotating Spindle Type Series 422 | MITUTOYO
Blade Micrometer – Non-Rotating Spindle Type Series 422
ไมโครมิเตอร์ปากมีด
Order No. : 422-270-30
Range : 0-25 mm
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
340-523 | Outside Micrometer with Interchangeable Anvils, 600-700 mm | MITUTOYO
340-523
Outside Micrometer with Interchangeable Anvils | 600-700 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
343-252-30 | Caliper Type Micrometers Series 343, 50-75 mm | MITUTOYO
Caliper Type Micrometers Series 343
Order No. 343-252-30
Range : 50-75 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.
