Mitutoyo

POINT CALIPER SERIES 536

Order No.: 536-121

Range : 0-150 mm

Description :

This vernier point caliper has extra fine ground measuring jaws. It offers you the following benefits:

• Narrow-tip jaws fit into very small grooves and tracks, making it much easier for you to obtain many previously difficult outside measurements.

OFFSET CENTERLINE CALIPER SERIES 573 

ABSOLUTE DIGIMATIC AND VERNIER TYPES

Order No.: 573-605-20

Range 10.1-160 mm

Description :

These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:

• Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
• You can also measure from an edge to a hole centre.

ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573

EDGE-TO-CENTER TYPE

Order No.: 573-718-20

Range: 10.1-200 mm

Description : 

The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:

• Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
• You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
• Direct reading of pitch measurements is also available due to the offset value setting function.

OFFSET CALIPER – SERIES 573 -ABSOLUTE DIGIMATIC AND VERNIER TYPE

Order No.: 573-601-20

Range : 0-150 mm

Description :

These offset calipers enable you to measure stepped workpieces.
They offer you the following benefits:

• You can adjust the beam-mounted jaw to facilitate measurement of stepped sections and hard-to-reach workpiece features.

DIAL CALIPER SERIES 505

Order No.: 505-730

Range : 0-150 mm

Description :

This metric dial caliper allows you to take reliable measurements and offers you the following benefits:

• Ultra-smooth sliding and high shock protection
• Easy to read dial with large character height

LONG ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with Exclusive ABSOLUTE Encoder Technology

Order No.: 500-500-10

Range: 0-450 mm

Deacription :

• Long Digital caliper incorporating an ABSOLUTE scale and available with a measuring range from 450 mm to 1000 mm.

• Allows integration into statistical process control and measurement systems for models with measurement data output connector.

ABSOLUTE COOLANT PROOF CALIPER with Dust/Water Protection Comforming to IP67 Level

Brand : Mitutoyo

Order No. : 500-702-20

Range : 0 – 150 mm

Description :

• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems.

ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology

Order No. : 500-150-30

Range : 0-100 mm

Description :

• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector.

SuperCaliper SERIES 500

NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER

Brand : MITUTOYO

Order No. : 500-776

Range : 0-150 mm

Description :

This IP67 solar-powered digimatic SuperCaliper with ABSOLUTE system is a robust, high performance model and offers you the following benefits:

• Waterproof reliability
• Impact resistance of the display unit for improved usability in workshop conditions
• It operates in only 60 lux ambient lighting.
• Even if the illumination is temporarily less than 60 lux measuring can be performed by charging a super capacitor.
• Excellent resistance against water and dust (IP67 protection level) enabling you to use it in machining situations that include splashing coolant fluid

TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE

Order No.: 339-102

Range : 8-9″

Description :

• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid.

TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE (main unit)

CARBIDE-TIPPED

Order No. 137-013

Range : 50-63 mm

Description :

• Micrometer head for Extension-Rod Type inside micrometer.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings and Gauge Block Accessory Sets are available as reference gages for datum adjustment.

TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE

Order No.: 339-101

Range : 200-225 mm

Description :

• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid.