- Sort by Date
- Display 12 Products per page
-
ROUNDTRACER FLASH | MITUTOYO
ROUNDTRACER FLASH
Non-contact form measuring system based upon state-of-theart 2D image sensors.
The Perfect Combination of Precision and “Flash” Cycle Time
The 2D image architecture sets a new benchmark in the measuring industry, providing significant advantages.
High Speed
Unrivaled measuring speed, thanks to the no Z-axis movements. Full 2D optic.
Image Consistency
Complex profiles and part geometries are acquired inside the same image frame.
Axial Run-out
The 2D image frame allows for the entire surface to be captured dynamically, at each angle, during the part rotation.
Thru-holes Measurement
Only a few milliseconds are needed between the image acquisition and the measurement execution.
-
FORMTRACER Avant D3000/4000 Series | MITUTOYO
FORMTRACER Avant Series
Contour and Surface Roughness Measuring Systems
Highly functional and user-friendly surface texture measuring systems with innovative design features. Both surface roughness and contour measurement are available on a single system just by replacing the detector.
-
MF | Measuring Microscope Series 176 | MITUTOYO
MF
An easy-to-operate standard measuring microscope using specially designed long working distance ML objectives.
-
CRYSTA-Apex V SERIES | COORDINATE MEASURING MACHINES (CMM) | MITUTOYO
CNC Coordinate Measuring Machine
Standard CNC CMM CRYSTA-Apex V500/700/900 Series
Introducing a new generation CNC coordinate measuring machine
focused on accuracy, speed, and versatility.
-
2109A-70 | Dial Indicator SERIES 2 — Water-proof Type, 0.01 mm & 0.001 mm Graduation | MITUTOYO
Dial Indicator SERIES 2 — Standard Type, 0.001 mm & 0.005 mm Graduation | MITUTOYO
• Water-proof type dial indicators having a bezel with an outside diameter of 57 mm.
• O-rings and rubber bellows are used to prevent water and oil penetration.
• The bezel clamp can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is used.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance. -
2046A-60 | Dial Indicator SERIES 2 — Water-proof Type, 0.01 mm & 0.001 mm Graduation | MITUTOYO
Dial Indicator SERIES 2 — Standard Type, 0.001 mm & 0.005 mm Graduation | MITUTOYO
• Water-proof type dial indicators having a bezel with an outside diameter of 57 mm.
• O-rings and rubber bellows are used to prevent water and oil penetration.
• The bezel clamp can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is used.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance. -
2046A-09 | Dial Indicator SERIES 2 — Standard Type, 0.01 mm Graduation | MITUTOYO
Dial Indicator SERIES 2 — Standard Type, 0.01 mm Graduation | MITUTOYO
• Standard 0.01 mm graduation dial gages having a bezel with an outside diameter of 57 mm.
• The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
• The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is used.
• The grand gear is made of stainless steel with high resistance to wear and deformation.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance. -
2046A | Dial Indicator SERIES 2 — Standard Type, 0.01 mm Graduation | MITUTOYO
Dial Indicator SERIES 2 — Standard Type, 0.01 mm Graduation | MITUTOYO
• Standard 0.01 mm graduation dial gages having a bezel with an outside diameter of 57 mm.
• The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
• The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is used.
• The grand gear is made of stainless steel with high resistance to wear and deformation.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance. -
513 – 452 -10E / 513 – 452-10T | Dial Test Indicator SERIES 513 — Horizontal (20° Tilted Face), Vertical, and Parallel Types | MITUTOYO
Dial Test Indicator SERIES 513 — Horizontal (20° Tilted Face), Vertical, and Parallel Types No. 133195 | MITUTOYO
• Specially designed for easy viewing of dial.
-
513-454-10E / 10A / 10T | Dial Test Indicator SERIES 513 — Horizontal (20° Tilted Face), Vertical, and Parallel Types | MITUTOYO
Dial Test Indicator SERIES 513 — Horizontal (20° Tilted Face), Vertical, and Parallel Types No. 103006| MITUTOYO
- Specially designed for easy viewing of dial.
-
513-517-10E / 513-517-10T | Dial Test Indicator SERIES 513 — Pocket Type | MITUTOYO
Dial Test Indicator SERIES 513 — Pocket Type | MITUTOYO
• Slim design is suited for measurement in deep holes.
• Visibility of the dial face has been greatly improved thanks to a universal font, the selected color of the dial face, and improved balance between the pointer and the thickness of scale lines. The length of the contact point is shown in the illustration on the dial face.
• The crystal surface is flat to reduce glare and is coated to prevent scratches, dirt, and reflections.
• Bonding the bezel and crystal together leaves no gap for cutting fluid or oil to penetrate through to the dial face. (Note that this type is NOT water-proof.)
• Clutch type (with a clutch lever)
• With ø2 mm Carbide contact point
• Metric Dial Test Indicator is inspected according to JIS B 7533:2015. We guarantee accuracy by inspecting with the dial face facing upward. -
513-302-10E | Dial Test Indicator SERIES 513 — Universal Type | MITUTOYO
Dial Test Indicator SERIES 513 — Universal Type | MITUTOYO
• The direction of the probe movement can be freely changed by rotating the contact point section of the indicator.
