- Sort by Popularity
- Display 12 Products per page
-
611801 | Individual Metric Rectangular Gauge Blocks – 75mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 75mm | Mitutoyo
Order No. : 611801
Length : 75 mm
Description :
• If using only one length repeatedly, it is suggested to purchase individual gauge blocks.
• Nominal sizes which are not included in the chart below can be supplied custom-made on request.
• Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was calibrated by interferometry. -
149-803-10 | Micrometer Heads – Small Standard Type with Carbide-Tipped Spindle – SERIES 149 | MITUTOYO
MICROMETER HEAD – SMALL STANDARD TYPE WITH CARBIDE-TIPPED SPINDLE – SERIES 149
Order no. 149-803-10
Range: 0-15mm
Description :
• Carbide-tipped spindle provides high abrasion resistance.
-
ROUNDTEST RA-2200 | MITUTOYO
ROUNDTEST RA-2200
High-speed automatic centering / leveling function contributes to a significant reduction in the man-hours required for setups.
-
311-225 | SQUARE METER SERIES 311 – Squareness/Straightness Measuring | MITUTOYO
• Squareness (perpendicularity) and straightness measurements can be performed accurately and efficiently by just moving a lever. Use the vertical motion handle on the rear of the main unit for operation.
• Highly accurate measurement of squareness and straightness is available by calibrating a square as a master using the built-in perpendicularity adjustment mechanism. Prepare a square to be used for accuracy check/adjustment separately.
• Sliding force: Approx. 2 to 5 N
-
133-143 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 50-70mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-143
Range : 50-75mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment. -
552-302-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552-with standard jaws 0-450mm | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with standard jaws
Order No.: 552-302-10
Range : 0-450 mm
Description :
This is a lightweight standard model of Digimatic caliper with steel jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
293-140-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 0-25mm | MITUTOYO
QuantuMike
Series 293 IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 0-25mm• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble.
Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions.
-
147-402 | Wire Micrometer – Series 147 | MITUTOYO
Wire Micrometer – Series 147
Range : 0-0.4″
Order No. 147-402
-
02AZD790B | U-WAVE-T CONNECTION CABLE B WITH DATA BUTTON IP MICROMETER TYPE | MITUTOYO
U-WAVE-T CONNECTION CABLE B
WITH DATA BUTTON IP MICROMETER TYPE
Description
- This connecting part connects a measuring tool to its U-WAVE T unit. Choose the appropriate cable for your measuring tool from the seven types below, A to G.
-
293-257-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Size : 275-300 mm
• Superior environmental resistance.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-344-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Range :0-1″
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
227-207-20 | ABSOLUTE Digimatic Micrometer with Adjustable Measuring Force Series 227, 20-30 mm, 2-10 N | MITUTOYO
ABSOLUTE Digimatic Micrometer / ไมโครมิเตอร์วัดภายนอก
with Adjustable Measuring Force Series 227
Range : 20-30 mm
Order No. 227-207-20
Measuring force : 2-10 N
• Digimatic micrometer dedicated to applications requiring a constant / low measuring force such as measuring wire, paper, and plastic / rubber parts.
• Measuring data can be hold at the measuring force setting. This function provides stable measurement and repeatability.
• Measuring force is adjustable (in steps) to suit various kinds of workpieces.
• Non-rotating spindle.
• Measuring faces: Carbide.
