- Sort by Popularity
- Display 12 Products per page
-
125-108 | Screw Thread Micrometer, 25-50 mm, 1-1.75 mm/24-14TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-108
Range : 25-50 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
123-102 | Disk Micrometer – Hardened Steel Disk Series 123, 25-50 mm, Disk=20 mm | MITUTOYO
Disk Micrometer – Hardened Steel Disks
Order No. 123-102
Range : 25-50 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
369-411-20 | Disk Micrometer, QuickMike, IP65 – 0-30 mm | MITUTOYO
Disk Micrometer- IP65, QuickMike
Order No. : 369-411-20
Range : 70-30 mm
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module (series 227: 0.4 to 3 module).
• Equipped with Ratchet Stop for constant measuring force. -
395-252-30 | Tube Micrometer, 25-50mm | MITUTOYO
TUBE MICROMETER – SERIES 395
Order No. 395-252-30
Range: 25-50mm
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
115-308 | Tube Micrometer – Spherical and Cylindrical Anvil Type, 0-25mm | MITUTOYO
TUBE MICROMETER – SPHERICAL AND CYLINDRICAL ANVIL TYPE – SERIES 115
Range : 0-25 mm
Order No. 115-308
• Spindle face: Carbide.
• Series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
114-165 | V-Anvil Micrometer – 5 Flute, 5-25 mm | MITUTOYO
V-ANVIL MICROMETER – 5 FLUTE
Order No. : 114-165
Range : 5-25 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
406-251-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 25-50 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 25-50 mm
Resolution : 0.001 mm
Order No. : 406-251-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
103-148-10 | Outside Micrometer Series 103, 275-300 mm | Mitutoyo
Outside Micrometer Series 103
Range 275-300 mm
Graduation 0.01 mm
Order No. 103-148-10
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
103-929 | Outside Micrometer Series 103 Set, 0-3″, (3 pcs.), 0.001″ | MITUTOYO
Outside Micrometer Series 103 Set
Range : 0-3″ (3 pcs./set)
Graduation : 0.001″
Order No. 103-929
-
104-135A | Outside Micrometer with Interchangeable Anvils, 0-150 mm | MITUTOYO
104-135A
Outside Micrometer with Interchangeable Anvils | 0-150 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• Equipped with Ratchet Stop for constant measuring force. -
343-350-30 | Caliper Type Micrometers Series 343, 0-1″ | MITUTOYO
Caliper Type Micrometers Series 343
Order No. 343-350-30
Range : 0-1″
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
126-130 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 125-150 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-130
Range : 125-150 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional.
