- Sort by Popularity
- Display 12 Products per page
-
126-128 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 75-100 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-128
Range : 75-100 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
123-113 | Disk Micrometer – Disks with Carbide Tips Series 123, 0-25 mm, Disk=20 mm | MITUTOYO
Disk Micrometer – with Carbide Tips
Order No. 123-113
Range : 0-25 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
369-422-20 | Disk Micrometer – Non-Rotating Spindle, IP65, QuickMike, Inch/Metric, 1-2.2″ | MITUTOYO
369-422-20 | Disk Micrometer – Non-Rotating Spindle, IP65, QuickMike, Inch/Metric, 1-2.2″ | MITUTOYO
Disk Micrometer QuickMike- Non-Rotating Spindle – IP65
Order No. : 369-422-20
Range : 1-2.2″
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module (series 227: 0.4 to 3 module).
• Equipped with Ratchet Stop for constant measuring force. -
115-117 | Tube Micrometer, 50-75mm | MITUTOYO
TUBE MICROMETER – SERIES 115
Order No. 115-117
Range : 50-75 mm
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
331-264-30 | Spline Micrometer, 75-100mm | MITUTOYO
SPLINE MICROMETER SERIES 331
Order No. 331-264-30
Range. : 75-100 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• IP65 water / dust protection.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
167-388 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-388
Length : 1600 mm
-
102-311 | Outside Micrometers Series 102, 20-25 mm, 0.001 mm | MITUTOYO
Outside Micrometers Series 102,
Range : 20-25 mm
Graduation : 0.001 mm
Order No. : 102-311• Heat-insulated frame.
• Cut-away frame (behind anvil) for measuring in hard-to-reach places.
• Equipped with Ratchet Stop for constant measuring force.
• Measuring faces: Carbide.
• In addition to standard specification, a non-rotating spindle type tooth thickness micrometer is also available. -
103-158 | Outside Micrometer Series 103, 525-550 mm | Mitutoyo
Outside Micrometer Series 103
Range 525-550 mm
Graduation 0.01 mm
Order No. 103-158
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
406-250-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 0-25 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 0-25 mm
Resolution : 0.001 mm
Order No. : 406-250-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
105-412 | Outside Micrometer with Anvil Extension Collars 1400-1500 mm | MITUTOYO
Order No. 105-412
Outside Micrometer with Anvil Extension Collars
Range : 1400-1500 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
143-108 | Caliper Type Micrometers Series 143, 175-200 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-108
Range : 175-200 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
323-251-30 | Disk Micrometer Series 323, 25-50 mm, Disk 20mm | MITUTOYO
Disk Micrometer
Order No. 323-251-30
Range : 25-50 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range).
