- Sort by Popularity
- Display 12 Products per page
-
141-211 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE CARBIDE TIPPED , 50-200mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE – CARBIDE TIPPED
Order No. 141-211
Range: 50-200mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
511-706 | BORE GAGE SERIES 511, 250-400mm | MITUTOYO
BORE GAGE SERIES 511
Order No.: 511-706
Range: 250-400 mm
Description:
• This series includes models for highly accurate measurement of ø18 to 400 mm inside diameters.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values by reducing heat transfer from the operator’s hand.
• Optional extension rods are available for measuring deep holes. Customized products with a longer rod below the grip are also available upon request. -
500-168-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
*Carbide-tipped jaws for outside and inside measurement*
Order No. : 500-168-30
Range : 0-12″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
515-724 | CHECK MASTER SERIES 515 | MITUTOYO
• Designed to check the accuracy of table movements of machine tools and calibrate CMMs. Permanently wrung stack of gauge blocks is housed in a rigid frame.
• Can be used in either vertical or horizontal orientation.
-
193-111 | Digit outside Micrometer Series 193, 0-25 mm | MITUTOYO
Digit Outside Micrometer Series 193
Range : 0-25 mm
Order No. : 193-111
• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
340-720 | Outside Micrometer with Interchangeable Anvils, 12-18″ | MITUTOYO
340-720
Outside Micrometer with Interchangeable Anvils | 12-18″
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
468-265 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-265
Range : 0.65-0.8″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
468-986 | Digimatic Holtest – 3-point Internal Micrometers Set (Non-Interchange-Head Set) – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER SET | MITUTOYO
Non-Interchange-Head Set
Order No. : 468-986
Range : 0.275″ – 0.5″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
133-161 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 500-525mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-161
Range : 500-525mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment. -
339-301 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 200-1000mm | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-301
Range : 200-1000mm
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
526-162-20 | BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES, 1.50 – 3.95mm | MITUTOYO
BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES
บอร์เกจ – สำาหรับรูขนาดเล็กมาก
Order No.: 526-162-20
Range: 1.50-3.95 mm
Description:
• This series allows for agile and highly accurate comparative measurement of ø1 to 7 mm inside diameters.
• We offer an array of indicators. Contact us if you prefer any indicator other than the standard recommended indicator.
• Optional stand (215-120-10) is available for efficient measurement of multiple small holes. -
511-714-20 | BORE GAGE SERIES 511, 100-160mm | MITUTOYO
BORE GAGE SERIES 511
Order No.: 511-714-20
Range: 100-160 mm
Description:
• This series includes models for highly accurate measurement of ø18 to 400 mm inside diameters.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values by reducing heat transfer from the operator’s hand.
• Optional extension rods are available for measuring deep holes. Customized products with a longer rod below the grip are also available upon request.
