SERIES 550 | Digimatic Caliper Nib Style Jaws | Mitutoyo
ราคาต่ำสุด
THB 0.00
THB 0.00
ราคาปรกติ
THB 9,790.50
พร้อมส่ง
SKU
1MIT-DCNSJ-S550
• This model can measure both inside and outside dimensions with a specially shaped jaw.
• The digital display can reduce human error by preventing incorrect reading of measurement results. 550-3XX-20 is rated at IP67 and therefore can be reliably used at the manufacturing site.
• Data output function allows integration into statistical process control and measurement systems.
SPECIFICATIONS
Metric
| Code No. | Range (mm)*1 | Resolution (mm) |
Maximum permissible error (mm)*2 | Remarks | |
| E MPE | S MPE | ||||
| 550-301-20 | 0 - 200 (10.1 - 210) | 0.01 | ±0.03 | ±0.03 | IP67, with offset |
| 550-331-20 | 0 - 300 (10.1 - 310) | ±0.04 | ±0.04 | IP67, with offset / preset function for easy inside measurement |
|
| 550-203-10 | 0 - 450 (20.1 - 470) | ±0.05 | ±0.05 | — | |
| 550-205-10 | 0 - 600 (20.1 - 620) | — | |||
| 550-207-10 | 0 - 1000 (20.1 - 1020) | ±0.07 | ±0.07 | — | |
Inch/Metric
| Code No. | Range (mm)*1 | Resolution (mm) |
Maximum permissible error (mm)*2 | Remarks | |
| E MPE | S MPE | ||||
| 550-311-20 | 0 - 8 in/0 - 200 mm (0.404 - 8.4 in/10.26 - 210.16 mm) |
0.0005 in/ 0.01 mm |
±0.0015 in/ ±0.03 mm |
±0.0015 in/ ±0.03 mm |
IP67, with offset |
| 550-341-20 | 0 - 12 in/0 - 300 mm (0.404 - 12.4 in/10.26 - 310.16 mm) |
±0.002 in/ ±0.04 mm |
±0.002 in/ ±0.04 mm |
IP67, with offset / preset function for easy inside measurement |
|
| 550-223-10 | 0 - 18 in/0 - 450 mm (0.504 - 18.5 in/12.8 - 462.7 mm) |
±0.002 in/ ±0.05 mm |
±0.002 in/ ±0.05 mm |
— | |
| 550-225-10 | 0 - 24 in/0 - 600 mm (0.504 - 24.5 in/12.8 - 612.7 mm) |
— | |||
| 550-227-10 | 0 - 40 in/0 - 1000 mm (1.004 - 41 in/25.5 - 1025.4 mm) |
±0.003 in/ ±0.07 mm |
±0.003 in/ ±0.07 mm |
— | |
• Power source: SR44 battery (1 pc.), 938882 included as standard (for operational checks)
• Position detection method: ABSOLUTE electromagnetic induction linear encoder
• Response speed: Unlimited
*1 ( ): Inside measurement
*2 The Partial Surface Contact Error (E MPE) and Shift Error (S MPE) are terms defined by ISO 13385-1:2019.
| แบรนด์สินค้า | MITUTOYO |
|---|---|
| Resolution | 0.0005 in/ 0.01 mm |
| Maximum permissible error E MPE | ±0.003 in/ ±0.07 mm |
| Maximum permissible error S MPE | ±0.003 in/ ±0.07 mm |
| Remarks | — |
เขียนรีวิวสินค้าของคุณเอง