เครื่องมือกัดแต่งโลหะ
Easy, Rapid and High-accuracy Measurement of Workpieces That Require an Accuracy of 1 μm or Less
Delivering a Maximum Permissible Error JMPE of ±0.5 μm accuracy at 0.1 μm resolution means Mitutoyo's MDH-25MB is the most accurate digital micrometer available*, and this instrument will enable you to easily and
rapidly measure workpieces that require very-high-accuracy measurement. This remarkable performance has been attained thanks to Mitutoyo's proprietary ABS (absolute) rotary encoder and high-accuracy thread cutting technology.
Beyond the Usual Micrometer! Many More Kinds of High-accuracy Parts Now Measurable.
This micrometer allows easy, rapid and high-accuracy measurement of workpieces that require a measuring accuracy of 1 μm or less, such as medical parts, precision instruments and auto-parts regarded as difficult to be accurately measured with conventional micrometers.
Pin gage measurement |
Allows numerically controlled (NC) automated centering and chamfering. Long tool life even when machining hardened steel
Features of DN2HC-ATH
1.Thinning provides good biting properties.High chipping resistance due to the blunt-angled tipOptimized edge shape for outstanding cutting capabilities and high chipping resistance
2.ATH Coating provides long tool life, even with hardened steel.
Features | 01 | Employs blunt-angled tip and thinning for optimized edge shape. |
Features | 02 | Adopts ATH Coating | Long tool life evenwith hardened steel |
●Hardness and oxidation resistance of TH Coating is further improved. Enables longer life and higher efficient when cutting high-hardness materials. (Si nano composite coating with finer crystal particles)
●Exhibits amazing performance when cutting high-hardness materials (55HRC or higher)
●Long life for both dry cutting and wet cutting
COOLANT PROOF is the universal term for Mitutoyo Digimatic Small Tool Instruments that are not only resistant to dust and water ingress (rated to IP65 or better) but also to deterioration of materials due to contact with the cutting oil or coolant fluids in normal use.
Note: Some types of aggressive cutting oil or coolant may degrade the sealing materials over time.
●This standard ABS coolant-proof caliper is rated to protection code IP67, which allows trouble-free use even in situations where it is exposed to coolant or cutting oil. A 100% air-leak test before product shipment guarantees IP67 performance.
●The character height on the LCD has been enlarged to 9mm (former model: 7.4mm) for enhanced ease of use.
●Simple design with only one switch allows easy measurement operation.
●The Auto-Power ON/OFF function blanks the LCD by turning off the power if the caliper is not used for about 20 minutes.
Ball End Mill for Hardened Steel
“IX” changes the concept of carbide!
Features of IX-EPDB-TH3
Features | 01 | Next-generation carbide alloy for machining hardened stee |
●Features refined material structure with approximately 10% greater hardness than conventional materials
●Incorporates next-generation additive elements to combine high wear resistance (hardness) and chipping
resistance (toughness)
Features | 02 | Newly designed cutting edge profile with superior durability |
Features | 03 | Outer diameter measurement marking & short shank design |
This is a High-accuracy digital height gauge and multifunction measurement.
Features
GO/±NG judgment by LED and display symbols
LEDs indicate tolerance judgment status – green for GO, red for +NG, and orange for -NG. Status is also indicated by corresponding symbols appearing on the display.
Intuitive buttons and layout
The symbols are for frequently used keys.
Cross-keys provide better operability.
Inside/outside
คณะผู้บริหารและตัวแทนจาก MITUTOYO ร่วมประชุมสรุปประจำปี และสวัสดีปีใหม่ 2024 ผู้บริหาร JSR GROUP
คณะผู้บริหารและตัวแทนจาก มิตูโตโย ร่วมประชุมสรุปประจำปี และสวัสดีปีใหม่ 2024