High-Accuracy Digimatic Micrometer MDH-25MB

MDH-25MB

Easy, Rapid and High-accuracy Measurement of Workpieces That Require an Accuracy of 1 μm or Less

Delivering a Maximum Permissible Error JMPE of ±0.5 μm accuracy at 0.1 μm resolution means Mitutoyo's MDH-25MB is the most accurate digital micrometer available*, and this instrument will enable you to easily and 
rapidly measure workpieces that require very-high-accuracy measurement. This remarkable performance has been attained thanks to Mitutoyo's proprietary ABS (absolute) rotary encoder and high-accuracy thread cutting technology. 

APPLICATION

Beyond the Usual Micrometer! Many More Kinds of High-accuracy Parts Now Measurable.

This micrometer allows easy, rapid and high-accuracy measurement of workpieces that require a measuring accuracy of 1 μm or less, such as medical parts, precision instruments and auto-parts regarded as difficult to be accurately measured with conventional micrometers.

Chamfering Tool for Hardened Steels  DN2HC-ATH

Allows numerically controlled (NC) automated centering and chamfering. Long tool life even when machining hardened steel

Features of DN2HC-ATH

1.Thinning provides good biting properties.High chipping resistance due to the blunt-angled tipOptimized edge shape for outstanding cutting capabilities and high chipping resistance

2.ATH Coating provides long tool life, even with hardened steel.

●Hardness and oxidation resistance of TH Coating is further improved. Enables longer life and higher efficient when cutting high-hardness materials. (Si nano composite coating with finer crystal particles)

●Exhibits amazing performance when cutting high-hardness materials (55HRC or higher)  

●Long life for both dry cutting and wet cutting

 Resistant to chipping; provides long life compared

Digital Caliper with waterproof scale IP67 ABSOLUTE Coolant Proof Caliper

COOLANT PROOF is the universal term for Mitutoyo Digimatic Small Tool Instruments that are not only resistant to dust and water ingress (rated to IP65 or better) but also to deterioration of materials due to contact with the cutting oil or coolant fluids in normal use.

Note: Some types of aggressive cutting oil or coolant may degrade the sealing materials over time.

FEATURES

●This standard ABS coolant-proof caliper is rated to protection code IP67, which allows trouble-free use even in situations where it is exposed to coolant or cutting oil. A 100% air-leak test before product shipment guarantees IP67 performance.

●The character height on the LCD has been enlarged to 9mm (former model: 7.4mm) for enhanced ease of use.

●Simple design with only one switch allows easy measurement operation.

●The Auto-Power ON/OFF function blanks the LCD by turning off the power if the caliper is not used for about 20 minutes.

 IX-EPDB-TH3

 Ball End Mill for Hardened Steel

 “IX” changes the concept of carbide!

Features of IX-EPDB-TH3

• Uses a newly-developed ultra-fine-graincarbide alloy to combine high wear resistance and chipping resistance.
• Uses a TH3 coating designed for machining hardened steel, offering outstanding wear resistance and heat resistance.
• Greatly improves tool life, especially when machining 60HRC class hardened steel.

●Features refined material structure with approximately 10% greater hardness than conventional materials

●Incorporates next-generation additive elements to combine high wear resistance (hardness) and chipping
 resistance (toughness)

Effectively reduces chipping common when machining hardened steel.

QM-Height Series - High-Performance Height Gage

This is a High-accuracy digital height gauge and multifunction measurement.

Features

• Best-in-class accuracy ±(2.4+2.1L/600) μm
• Built-in pneumatic flotation system enables smooth movement over a surface plate. Models without the air suspension feature are also available.
• Simple-to-use control panel enables most measurements to be made with a single keystroke.
• Battery life of 1200 hours in continuous use with four AA batteries, an improvement from 300 hours.
• Install the optional U-WAVE-T measurement data communication system to output measurement data directly to Excel or SPC software on your PC.  

GO/±NG judgment by LED and display symbols

LEDs indicate tolerance judgment status – green for GO, red for +NG, and orange for -NG. Status is also indicated by corresponding symbols appearing on the display.

Intuitive buttons and layout

The symbols are for frequently used keys.       

Cross-keys provide better operability.  

Inside/outside

คณะผู้บริหารและตัวแทนจาก MITUTOYO ร่วมประชุมสรุปประจำปี และสวัสดีปีใหม่ 2024 ผู้บริหาร JSR GROUP

คณะผู้บริหารและตัวแทนจาก มิตูโตโย ร่วมประชุมสรุปประจำปี และสวัสดีปีใหม่ 2024