ABSOLUTE Digimatic Indicator ID-CGX SERIES 543 — Bore Gage Type | MITUTOYO
ราคาต่ำสุด
THB 0.00
THB 0.00
ราคาปรกติ
THB 11,579.54
พร้อมส่ง
SKU
ID-CGX
• Dedicated to inside diameter measurement with minimum-value holding and tolerance judgment functions*.
Use together with a Mitutoyo bore gage.
• Five buttons, status icons, and clear button indications allow easy operation and various functions.
• Wide display and analog bar graph are standard on all models.
• Up to three sets of master values and upper / lower tolerance values can be stored to simplify the master setting.
• By using the parameter setup kit (optional) and the dedicated software, the functions and the parameters can be configured using a computer.
* Tolerance judgment results cannot be output.
Functions
• Minimum value detection
Note: Peak detection
1) Sampling rate: 50 readings/s
2) Capturing speed: 50 μm/s (max.)
• Preset (3 Preset values can be stored)
• Tolerance judgment (3 sets of upper and lower limits can be stored)
• Resolution selection
• Analog bar resolution selection
• Key lock
• Display hold (when no external device is connected)
• Data saving/calling (when no external device is connected)
• Data output
• External PC setting input
• Display rotation (330°)
• Low battery voltage alarm display
• Error alarm display
SPECIFICATIONS
Metric --- ISO/JIS Type
| Order No. | Range (mm) |
Resolution (mm) |
Maximum permissible error (MPE)*1 (mm) | Maximum permissible limit (MPL) |
Battery life (normal use)*2 |
Mass (g) |
|||
| Partial measuring range P MPE |
Total measuring range E MPE |
Hysteresis H MPE |
Repeatability R MPE |
Measuring force (N) | |||||
| 543-310B-10 | 12.7 | 0.001/0.01 (selectable) |
0.003 | 0.003 | 0.003 | 0.002 | 1.5 or les | Approx. 1 year |
170 |
Inch / Metric --- ISO/JIS Type
| Order No. | Range | Resolution | Maximum permissible error (MPE)*1 (mm) | Maximum permissible limit (MPL) |
Battery life (normal use)*2 |
Mass (g) |
|||
| Partial measuring range P MPE |
Total measuring range E MPE |
Hysteresis H MPE |
Repeatability R MPE |
Measuring force (N) | |||||
| 543-311B-10 | 0.5 in/ 12.7 mm |
0.00005/ 0.0001/ 0.0005 in, 0.001/ 0.01 mm (selectable) |
0.003 | 0.003 | 0.003 | 0.002 | 1.5 or less | Approx. 1 year |
170 |
Inch / Metric --- ASME/ANSI /AGD type
| Order No. | Range | Resolution | Maximum permissible error (MPE)*1 (in) | Maximum permissible limit (MPL) |
Battery life (normal use)*2 |
Mass (g) |
||
| Overall*3 | Hysteresis | Repeatability | Measuring force (N) | |||||
| 543-312B-10 | 0.5 in/ 12.7 mm |
0.00005/ 0.0001/ 0.0005 in, 0.001/ 0.01 mm (selectable) |
±0.00010 | 0.00010 | 0.00010 | 1.5 or less | Approx. 1 year |
170 |
• Power source: CR2032 battery (1 pc.), included as standard (for operational checks)
*1 These values apply to normal measurements at 20 °C.
*2 Applies only if not connected to a data processor. Battery life depends on use of the indicator. Use the above value as a
guide only.
*3 Overall magnification and linearity
Note: Flat-back type only.
| แบรนด์สินค้า | MITUTOYO |
|---|
เขียนรีวิวสินค้าของคุณเอง