SERIES 552 | Digital ABS Carbon Fibre Caliper Long Jaw | Mitutoyo
ราคาพิเศษ
THB 0.00
ราคาปรกติ
THB 101,953.27
*ราคายังไม่รวม VAT
พร้อมส่ง
SKU
DCFCLJ-S552
QTY:
5
- Digimatic Calipers employ CFRP (Carbon-Fiber Reinforced Plastics) in the beam and jaws. Leightweight and easy to handle.
- Rated to IP66: can be used in adverse environments where the caliper is subject to splashing by cutting fluid or coolant. The digital display can reduce human error by preventing incorrect reading of measurement results.
SPECIFICATIONS
Metric
| Code No. | Range (mm)*1 | Resolution (mm) | Maximum permissible error (mm)*2 | |
| E MPE | S MPE | |||
| 552-150-10 | 0 - 450 (20.1 - 470) | 0.01 | ±0.06 | ±0.06 |
| 552-151-10 | 0 - 600 (20.1 - 620) | |||
| 552-152-10 | 0 - 1000 (20.1 - 1020) | ±0.07 | ±0.07 | |
| 552-153-10 | 0 - 1500 (20.1 - 1520) | ±0.11 | ±0.11 | |
| 552-154-10 | 0 - 2000 (20.1 - 2020) | ±0.14 | ±0.14 | |
Inch/Metric
| Code No. | Range (mm)*1 | Resolution (mm) | Maximum permissible error (mm)*2 | |
| E MPE | S MPE | |||
| 552-160-10 | 0 - 18 in/0 - 450 mm (0.504 - 18.5 in/12.8 - 462.7 mm) |
0.0005 in/0.01 mm | ±0.0025 in/±0.06 mm | ±0.0025 in/±0.06 mm |
| 552-161-10 | 0 - 24 in/0 - 600 mm (0.504 - 24.5 in/12.8 - 612.7 mm) |
|||
| 552-162-10 | 0 - 40 in/0 - 1000 mm (1.004 - 41 in/25.5 - 1025.4 mm) |
±0.003 in/±0.07 mm | ±0.003 in/±0.07 mm | |
| 552-163-10 | 0 - 60 in/0 - 1500 mm (1.004 - 61 in/25.5 - 1525.4 mm) |
±0.0045 in/±0.11 mm | ±0.0045 in/±0.11 mm | |
| 552-164-10 | 0 - 80 in/0 - 2000 mm (1.004 - 81 in/25.5 - 2025.4 mm) |
±0.0055 in/±0.14 mm | ±0.0055 in/±0.14 mm | |
• Dust / Water protection level: IP66 (IEC60529)*3
• Power source: SR44 battery (1 pc.), 938882
included as standard (for operational checks)
• Battery life: Approx. 5,000 hours in continuous use
• Response
speed: Unlimited
• Material of jaws: Stainless Steel Hardened
*1 ( ): Dimension in inside measurement
*2
The Partial Surface Contact Error (E MPE) and Shift Error (S MPE) are terms defined by ISO 13385-1:2019.
*3
Rustproofing shall be applied after use if caliper was in contact with coolant.
Note: A constant-force mechanism
is used in the finger rest; however, this is only an auxiliary mechanism to avoid measurement
error caused by
excessive measuring force. To measure with good accuracy, use the minimum necessary measuring force
for the
caliper measuring faces to make sufficient contact with the workpiece. Refer to page 13-21 for details.
| แบรนด์สินค้า | MITUTOYO |
|---|
เขียนรีวิวสินค้าของคุณเอง