360-DEG ROTATING DUAL CAMERA BORE SCOPE

Equipped with a 360-deg rotating for Front and Side monitoring simultaneously For recording Still images and Videos

IP68 equivalent cameras offer dustproof and waterproof performance! With oil-resistant, suitable for observation under harsh environments.

Equipped with white LEDs to illuminate the front and side of the cameras.They brighten dark pipe while recording.

With the 360-deg rotating dual camera, no side-view adapter
is required

SPECIFICATIONS

TAGLENS

Ultra-deep focus eliminates the limitations of the conventional lens

Optical imaging can be complicated: observation target distance may vary due to a tilt or complex geometry, target may be in motion, and more than one target may be captured in the frame. In such situations, TAGLENS keeps the entire imaging volume in focus resolving the inevitable problem of the conventional optical systems. Omnifocal shooting provides improved productivity through enhanced imaging efficiency and reduced costs. 

SPECIFICATIONS

TAGLENS-T1 Ultra-high-speed varifocal lens.A dedicated controller and a control software TAGPAK-C are offered  as a standard product.
Video Microscope Unit VMU-T1 Microscope unit for configuring a varifocal optical system by incorporating the TAGLENS-T1, the objective lens and the camera.
Illumination light source: Pulsed Light Source (PLS) In combination with TAGLENS-T1, this ultra-high-speed LED pulsed light source device captures focused images at the desired

SCALE LOUPE WITH LED LIGHT

Equipped with LED light, suitable for observation in dark places

SPECIFICATIONS

TD4N type

The cutting edge shape was reviewed for TD4N so that remains are reduced.This enables the load on the next process to be reduced by up to 40% compared to conventional products.
Since it is difficult to create tool shape definitions in CAM for the complicated cutting edge shapes of high-feed tools, in many cases the tools are used with the definition for a simple R radius tool. The differences between this definition and the actual tool shape result in remains that cannot be checked on CAM and become more work for the next process.

By making it possible to use both the front and back sides of inserts, 4 corners can be used. The inserts are provided with a large rake angle which exhibits an excellent cutting force reduction effect even when compared to general positive-shape inserts.
Features of insert breaker
C breaker Corresponds

MiSCAN Vision System

A thoroughbred microscopic-form measurement system, developed from coordinate measuring machine and vision measurement system technology

Highly accurate autonomous scanning covering from micro-form to large workpieces

Newly developed MPP-NANO probe on which styli as small as 125 µm diameter can be mounted achieves autonomous scanning of fine detail.Using the observation camera, the approach to the workpiece can be easily performed while also checking for dirt and scratches on the workpiece. The highly proven SP25M scanning probe is also supported so the system can also be used for large workpieces as well as small.

Vision measurement functions provide high level performance

Uses the same image head as the Quick Vision series, the best-selling vision measuring system. Also equipped with the same optical system as the Quick Vision, multiple lighting functions and excellent evaluation software to provide high performance.

Measuring machine well suited to micro-form

คณะผู้บริหารและตัวแทนจาก MITUTOYO ร่วมประชุมสรุปประจำปี และสวัสดีปีใหม่ 2024 ผู้บริหาร JSR GROUP

คณะผู้บริหารและตัวแทนจาก มิตูโตโย ร่วมประชุมสรุปประจำปี และสวัสดีปีใหม่ 2024