Quick inspection

It takes only about 2 seconds to inspect a hole, thus significantly reducing the Inspection time (M1.4, depth 3 mm). Through setting the data for up to fifty spots, the user can continuous check threaded holes of different depths (for instruments with an XY positioning table).

Floating mechanism (radial compensation, angular compensation)

The floating mechanism ensures precise screwing motion regardless of the positional accuracy or inclination of holes. The system monitors the floating amount with a sensor to measure the depth of threaded holes with high precision.

Inspection torque setting of your choice

Conventional manual inspection using thread gauges can be automated, enabling the inspection at more stable torques.

Inspection (screwing) torque can be set to best suit each product. Because the internal rotation resistance has been

Further improves the conventional compound shape of R and taper to both resist breakage and suppress deflection.
 ※Since the actual effective under-neck length is shorter than theconventional Deep Series, be sure to check the interference region before use.

Caution
The interference region has changed due to changes in the neck shape. Be sure to check for interference before starting machining.

Static load test results

Testing tool size φ1×Under neck 6

Deflection suppression effect is high even under the same load. Enables machining with even higher accuracy.

 Large Clamp Lever
 • This lever provides reliable slider clamp operation.

 Base
 • Novel design of the base well fit to be gripped by hand

 Column
 • Durability and high measuring accuracy are ensured.
 • Increased rigidity: 35 x 15mm (common to all models)
 • Instrumental error of 300mm model: ±0.03mm (±0.04mm in the conventional models)

Built-in ABS (Absolute) Encoder
 • This encoder eliminates the necessity of setting the reference point at every power-on.
 • It has improved reliability because no over-speed error will occur

 Large Liquid Crystal Display
 • Character size: 10 x 3.8mm (9 x 3.5mm in the conventional models)
 • Readable at dark sites and friendly for aged persons

 Output Function Provided
 • Measured data is outputted to the small

From a Digimatic gage connected with U-WAVE

Data is obtained via wireless communication and sent to commercial software such as Excel

Higher Efficiency

Data can be input by single button operation! Since there is no need for manual