HEIGHT GAUGE
-
January 12, 2026
Digimatic Height Gage SERIES 192
Height gauges feature improved ease of operation and enhanced functionality
Resolution switchable to 0.01 or 0.005 mm
Simple switching operation
Output function for all models
Connectable to the Digimatic Mini-processor DP-1VR, or to a PC via the input tool
Highly efficient operation plus preset-function convenience
Preset functions enable two reference planes to be set relative to surface plate datum
• Example of preset 1
To measure a height of 70 mm, with a reference plane height of 50 mm
• Example of preset 2
To measure a height of 130 mm, with a reference plane height of 150 mmLarge LCD characters
Character height of 11 mm makes display easy to read and avoids eyestrain.
Slider handle
Inclined handle improves slider ergonomics.
HD-30AX display
• Design registration pending• Large function buttons. Frequently used buttons are positioned on the right-hand side of the panel for easy operation.
• Uses the proven alarm system as used on -
June 19, 2025
QM-Height Series - High-Performance Height Gage
This is a High-accuracy digital height gauge and multifunction measurement.
Features
- Best-in-class accuracy ±(2.4+2.1L/600) μm
- Built-in pneumatic flotation system enables smooth movement over a surface plate. Models without the air suspension feature are also available.
- Simple-to-use control panel enables most measurements to be made with a single keystroke.
- Battery life of 1200 hours in continuous use with four AA batteries, an improvement from 300 hours.
- Install the optional U-WAVE-T measurement data communication system to output measurement data directly to Excel or SPC software on your PC.
GO/±NG judgment by LED and display symbols
LEDs indicate tolerance judgment status – green for GO, red for +NG, and orange for -NG. Status is also indicated by corresponding symbols appearing on the display.
Intuitive buttons and layout
The symbols are for frequently used keys.
Cross-keys provide better operability.
Inside/outside
-
June 19, 2025
ABS Digimatic Height Gage Series 570
The New Standard in Smart and Reliable Height Measurement
Feature
Maximum permissible error EMPE : ±0.03 mm, ±0.05 mm, ±0.0015 in/±0.03 mm,±0.0020 in/±0.05 mm
Measuring range : 0 to 300 mm,0 to 600 mm,0 to 12 in/0 to 300 mm, 0 to 18 in/0 to 450 mm, 0 to 24 in/0 to 600 mm
Resolution : 0.01 mm,0.0005 in/0.01 mm
Functions : ON/OFF, ORIGIN, ZERO/ABS, HOLD/DATA, inch/mm conversion*
Drive method : Slider-feed wheel (manual)
Data output : DIGIMATIC d1
Max. response speed : Unlimited
LCD character height : 12 mm
Helps transform manufacturing sites into smart factories
The design of the case allows for easy installation of U-WAVE (optional), which enables wireless transmission of measurement data, promoting smarter use of data in manufacturing sites.
Supports smooth and reliable measurement operations
The handle for moving the slider enables smooth vertical movement. In addition, the highly rigid pillars and large clamp levers
Recent Posts
